Durable hydrophilic surface modification of PDMS and silicone via grafting-to primary layer strategy

Technology
In development
University

A reactive epoxy-based surface modification technology for PDMS and silicone. A poly(glycidyl methacrylate) (PGMA) primary layer is covalently attached to plasma-oxidized substrates, then hydrophilic polymers are grafted to the remaining epoxy groups to form stable, durable coatings. Demonstrated coatings reduce water contact angle to approximately 10°, survive solvent and water rinses, and conformally cover patterned non-flat PDMS surfaces. Potential applications include silicone-based components requiring controlled wettability and stable surface functionality. Current work is expanding polymer candidates and characterizing durability and migration behavior.

Overview

This surface modification approach makes PDMS and silicone surfaces hydrophilic and chemically functional by creating a reactive primary layer that can be used to attach functional polymers. A poly(glycidyl methacrylate) (PGMA) coating is deposited on an oxidized substrate; some epoxy groups in the coating bond to the substrate, while the remaining epoxy groups in polymer loops and tails act as anchor sites. In a second "grafting to" step, hydrophilic polymers are covalently attached to those anchor sites. The result is a stable, rinse-resistant hydrophilic layer. Preliminary tests on flat and patterned PDMS reduced water contact angle to roughly 10° while leaving the coating thickness and wettability unchanged after repeated rinsing. The method is designed for PDMS/silicone components that need durable surface functionality and controlled wettability.

Technical specifications

Key features and demonstrated results:

  • Reactive PGMA primary layer: 2–4 nm thick, deposited by dip-coating and annealing; stable after solvent and water rinses.
  • Plasma pre-treatment: reduced-pressure air plasma oxidizes the PDMS surface, introduces functional groups, lowers water contact angle to ≤40° within 30 seconds, and removes less than 4 nm of material after up to 8 minutes.
  • "Grafting to" attachment: carboxy-terminated poly(acrylamide) or acrylamide–acrylic acid copolymers can be grafted to the reactive primary layer.
  • Resulting hydrophilic layer: approximately 10 nm thick; water contact angle reduced to about 10°.
  • Conformal coverage: demonstrated on patterned, non-flat PDMS surfaces.

Planned extensions:

  • Screen additional PGMA-based primary layer candidates and hydrophilic polymers.
  • Tune layer thickness and grafting density up to about 50 nm by varying grafting conditions.
  • Assess stability in water, surfactant solutions, solvents, and other liquid media using AFM, profilometry, and contact angle measurements.
  • Use quartz crystal microbalance (QCM) to measure permanence of attachment; GC-MS to characterize migration of volatile and semi-volatile organic compounds; TMA and DMA to measure thermal and viscoelastic properties.
Technology readiness level

The technology is at laboratory proof-of-concept stage. Preliminary results demonstrate stable primary layers and grafted hydrophilic coatings on flat and patterned PDMS, with significant contact angle reduction and rinse resistance. Remaining work includes systematic candidate selection, long-term exposure testing, migration analysis, durability assessment, and performance retention compared with baseline. After these planned validations, the method will be positioned for application-specific prototype testing.


About Clemson University

Clemson University is a comprehensive public land‑grant research university in Upstate South Carolina with a main campus and statewide outreach. Industry engages through co‑located facilities: an automotive innovation campus in Greenville, an energy testing complex in Charleston, and a research and technology park near the main campus with labs and offices. A strong co‑op program and corporate engagement team connect companies with faculty expertise and student talent, while the Extension network supports field trials and regional pilots. Research is backed by competitive federal funding from agencies such as NSF, NIH, DOE, USDA, and DOD. A dedicated technology transfer office provides IP, licensing, and startup support with clear pathways for industry‑sponsored agreements.

Halo home
Partner smarter. Move faster.
Get new partnering requests
delivered to your inbox.